How to Identify The Quality of PVC Pipe?




To identify the quality of PVC pipes, there are several ways to do this:


Measurement:
1. Measure the wall thickness: Check whether the specified wall thickness is reached. Here, we must pay attention to it. Some pipes are evacuated, the wall thickness of both ends meets the requirements, but the middle wall thickness is thin, which does not meet the requirements for use, and is reduced by evacuation. cost.

2. Measure the length: Check whether the specified length has been reached, some manufacturers rely on shortening the length to reduce the price. Negative deviations are not allowed by ASTM/ ANSI/ DIN/ BS/ JIS.


Look at:
1. look at the gloss: looks good surface gloss and oily, is a high-quality product.

2. look at the color: the standard high-quality PVC-U pipe is light beige, if it looks pale, it means that the calcium powder is added excessively, some manufacturers add too many miscellaneous materials, recycled materials, resulting in a black and yellow pipe.


Weighing:
Weighing: Weigh two pipes of the same diameter, wall thickness, and length. The heavier pipe calcium powder and impurities are added too much, and the material is not pure, which does not meet the requirements.

Fall:
Use foot on the side of the pipe, Check whether it is easily crushed. Throw the PVC pipe to the ground, the broken pipe is a "high calcium tablet". To save costs and increase profits, some manufacturers have added excessive amounts of calcium powder in the production of pipes. Such pipes are cheap, but their hardness is much lower and brittle, which is a non-conforming product. High-quality PVC pipe with ankles and even rolling with the car will not flatten and will not break, and the inferior PVC pipe can be broken with the ankle.


Inspection:
1. Test report: The test report of the pipe and the test report of its health indicators should be obtained. It is best to look at the original.
2. Technical indicators;
3. Vicat softening temperature ≥ 80 ° C;
4. Longitudinal retraction rate of ≤5%;
5. There is no change in the impregnation surface;
6. drop weight impact test (0 ° C) TIR ≤ 5c / o;
7. Hydraulic test in the 20-degree environment, the ring stress is 36MPa/38Mpa, no crack after 1 hour, no leakage.


Through the above methods, you can purchase qualified PVC pipes.

Comments

Post a Comment

Popular posts from this blog

Difference between water supply pipe and drain pipe

Image
The drain pipe is used for drainages, such as drainage, rainwater, and community drainage on real estate projects. The drain pipe itself has no pressure, can not withstand the pressure, and has no requirements for the health indicators. If you want to distinguish the quality of the pipe, it depends on its toughness and tensile properties. The water supply pipe is self-evident for use in the water supply. Of course, it is also used for the irrigation of farmland. The difference between it and the drainpipe is that it needs to withstand the pressure. If it is for the water supply project, it also needs health indicators. , non-toxic and non-polluting, and other indicators. Main difference: 1. Pressure: the pressure is different. 2. Pipe Diameter: the diameter of the drainpipe is large, generally DN50, the pipe diameter of the water supply pipe is small, generally DN15. Pipe specs: Commonly used PVC water supply pipe specifications are Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ75, Φ90, Φ110, Φ125
Read more

Konstant Pvc Pipes

Image
The quality and performance of our PVC pipe are assured by a wide array of tough standards, control tests. PRODUCTS PER LENGTH AND THICKNESS 4Inch Pipe (11O) = 3mm, 2.5mm, 2mm, 1.5mm, 1mm 75mm Pipe = 3mm Thickness, 2mm, 1mm 50mm Pipe = 2mm Thickness 32mm Pipe = 3mm Thickness, 2mm Thickness 25mm Pipe = 3mm Thickness, 2mm Thickness 20 mm Pipe = 3mm Thickness Order you PVC Pipes today @ Office Address: Konstant Industrial Estate, Benson Egbo Street off Ekrejobor Road Ughelli, Delta State. Phone: +2347038524258 +2348036581734, +2348056034846
Read more

PVC MANUFACTURING COMPANY IN DELTA STATE

Image
Konstant PVC Ltd is a foremost PVC manufacturing company established in Ughelli North, Delta State. We are the major manufacturer of all sizes of PVC Pipes in Delta state, Nigeria.  At Konstant Pvc, we have installed the most innovative Pvc production line; our finished products have been adjudged and acknowledged by our customers as among the best Pvc pipe in the market.  We work with skilled technicians and engineers with technical know-how to ensure we continue to maintain the quality of our pipes.    Our products are standard and attested to meet your building and plumbing needs. I.e. Water Heater, Waste Water, Boreholes, Shallow well, Kitchen Waste Water, etc. Our production capacity is very high to meet up with our customers’ demands, and we have the provision to address any customized order based on our customer's unique needs.   Konstant PVC production line comes with pipes of different dimensions and colors.   Products per Length and Thickness 4Inch Pipe (11O) = 3mm, 2.5mm
Read more